Basic Static NAT Configuration

Lab Steps:

1. labeling the interfaces
2. Enabling static NAT
 


Lab Configuration:

Step-1:

Router1(config)#interface fastethernet 0/0

Router1(config)#ip nat inside

Router1(config)#ip address 192.168.10.1 255.255.255.0

Router1(config)#interface fastethernet 0/1

Router1(config)#ip address 63.64.57.2 255.255.255.224

Router1(config)#ip nat outside

Step- 2:

Router1(config)#ip nat inside source static 192.168.10.1 63.64.57.2


No comments